Modérateurs : kenny la kenelle, Froggy, Bidib'
lets try and simplify .My mod is VERY simple .Basically tighten all
> 3 braids at the shoulder by the same amount in the V2.
> Bobs kite yesterday was 25 mm on each shoulder in each braid 16 m V2
> (I have done 40 mmm on mine ) .You fly with the adjuster on the 3
> rd braid at the shoulder fully tight .
> Thats it !! Should take most gumbys half an hour with Nanas sewing
> machine .
> If you already have BSR then just make the 1 st braid the same as
> the second .Bobs mod calls for the 1st braid tighter which can make
> the kite quite unstable .less seems to still be plenty for the
> desired performance improvement
so the sum of shortenigs on my kite are as follows:
1st: 0cm, 2+cm (center, shoulders)
2nd: 2cm, 4cm
3rd: half tight, 12cm
...and the rasults were impresive! stability was not affected and i
gained very fast turning & better power. not sure if adding
additional 2 cm as sugested for LSR and removing BSR on 1st braid
would make much of a difference? more than happy with the result for
now...
Hi Gunnar ''The mod is not on the scorp .the mod is not BSR .
I will go over it again for you, VO and anyone else to try .I
guarantee it will impress.
Tighten 3 rd braid by 4 cm on 16m at the shoulders and fly tight
tighten 2nd braid by 4 cm at the shoulders
Compensate by putting a knot in the front leader 15 cm from the end
and attach front lines to that point
If you really want to go for it tighten each cell at the trailing
edge in each cell inside the zips at the shoulder (ie the cells
towards the middle of the kite from the shoulder zips)by 2 cm (ie
sew them down )
16 will turn like the 13 with he power of the 19
Venom II, has no need for the trailing edge tuck as it is already
built in during manufacture
Hyper Venom (II) 13 M bobs shoulder reconstruction BSR. Shorten the
number one braid buy 30 millimetres
shorten the number two braid buy 15
millimetres
Hyper Venom (II) 16 M Bob shoulder reconstruction BSR. Shorten the
number one braid buy 45 millimetres
shorten the number two braid buy 25
millimetres
Hyper Venom (II) 19 M Bob shoulder reconstruction, BSR shorten the
number one braid buy 50 millimetres
shorten the number two braid buy 30
millimetres
The measurements given for the BSR are for each side of the kite.
Both the number-one
and the number two braid can be accessed through the inflation
zipper, it is only necessary
to make one adjustments there because both braids are floating.
aatamian a écrit :Je viens enfin d'acheter mes V1 en 16 et 10m.
Sur le forum arcusers, ils disent que le LSR (Lach Shoulder Reconstruction) est mieux que le BSR (Bob " " ).
Je vais poser les questions pour confirmation et j'attends le retour pour essayer...on se tiens au jus....
Avo
Retour vers Ailes en arche Peter Lynn
Utilisateur(s) parcourant ce forum : Aucun utilisateur inscrit et 1 invité